這個不用老師多說了吧，有 IB 的朋友在 2.0 版韌體釋出之前，都應該試試看的！
每天守著 Uhlenbrock 官網等 2.0 版，倒是意外等到這個 1.550 版。
可惜沒什麼太大的變更，F9-F12 仍然沒進展：Version 1.550 - 1.550
---------------------
+ Lissy-Mode ( individual loco controling system ) - mode 6 of the Intellibox
loco addresses can be visualized in the display. If a loco is recognized by the called
up Lissy-receiver which is visualized in the display, the loco can be placed at a
IB-Controller. The special documentation LISSY-Mode.pdf is to be found in the update directory or
on www.uhlenbrock.de
+ long addresses can now be programmed at the range of 128 - 16383
+ a route-control memory was installed. Now more routes can be called up at the same time
+ the IB-Control has the Lissy-Mode ( the same as the Intellibox ) - mode 5 of the IB-Control
+ the IB-Control has a mode for LocoNet programming. This mode is to be found in the
basic settings of the IB-Control
