[DIY]GenLI-S88N USB新版本(具S88N的PC連接XPressNET介面)

回覆文章
頭像
Kenny
站長兼工程組
站長兼工程組
文章: 2179
註冊時間: 2003-01-05 01:30
來自: 台北

[DIY]GenLI-S88N USB新版本(具S88N的PC連接XPressNET介面)

文章 Kenny »

這是另一個版本的連接介面, 與前一篇介紹的電路差別在於此版支援S88N, 適合搭配沒有S88N的Command Station(如Lenz的系統)使用

原始資料網頁: http://usuaris.tinet.cat/fmco/lokmaus_en.html#genlis88
PIC程式碼(GenLI 2A) : http://usuaris.tinet.cat/fmco/download/GenLI-S88.zip
手冊: http://usuaris.tinet.cat/fmco/download/ ... Manual.pdf (設定XPressNET與S88N的位址)

這是之前自己做的GenLI-S88電路, 尺寸比較大, 大約是8.2x 11.4cm
圖檔
新版本改用 USB介面, 同時將電路板縮小至上圖的一半, 即 8x5cm左右

完成品:
圖檔

單面電路板圖
圖檔

零件面圖
圖檔

包括零件列表PDF檔下載
http://www.tts.tw/~kenny/images/tts/GenLI_S88N_USB.pdf
回覆文章