Kato GS-4

北美擁有龐大的路線與眾多的車頭, 特別大型柴電車頭, 喜歡北美火車的車友記得多發表

版主: UP3985

回覆文章
foxhsu
特等資深會員
特等資深會員
文章: 1061
註冊時間: 2006-02-10 09:28

Kato GS-4

文章 foxhsu »

Kato GS-4和對應的車箱開始出貨, DCC方面果真採用與EM13相容, 不過也真的無法控制燈光, 非常奇怪的設計. :shock:

http://www.katousa.com/N/GS-4/EM13-Install.pdf

另外Kato也準備推出美國電車頭CG-1
最後由 foxhsu 於 2008-05-08 08:21 編輯,總共編輯了 1 次。
頭像
Nelson Lin
網站常客
網站常客
文章: 110
註冊時間: 2004-03-31 14:58
來自: 台北
聯繫:

文章 Nelson Lin »

Note From Kato regarding the GS4 Locomotive:

While the GS4 operates well in DC mode, we understand there is an issue with the use of DCC in the GS4 locomotive. To prevent damage to the locomotive and decoders, we ask that customers DO NOT install decoders in their locomotives and to NOT operate them on DCC until we announce a correction to this issue in the very near future. We apologize for the inconvenience this may cause some of our customers. We will resolve this issue in a timely and effective manner. Thank you for your understanding and support.

看到上述訊息,各位要幫GS4改裝DCC的車友還是先等等比較好喔!

:(
foxhsu
特等資深會員
特等資深會員
文章: 1061
註冊時間: 2006-02-10 09:28

文章 foxhsu »

foxhsu
特等資深會員
特等資深會員
文章: 1061
註冊時間: 2006-02-10 09:28

文章 foxhsu »

修正零件開始提供了, KATO經銷商提供免費的零件與安裝服務. 如果無法送回經銷商, 也可跟KatoUSA直接索取, 不過可能要自付運費.

http://www.katousa.com/dcc/gs-4/index.html
foxhsu
特等資深會員
特等資深會員
文章: 1061
註冊時間: 2006-02-10 09:28

文章 foxhsu »

GS-4零件收到了, 應該說只是小小的塑膠絕緣片. 美國境內免付運費, 另外附有安裝影片, 可以選擇CD/DVD.
圖檔
下方即是需要安裝的塑膠片.
圖檔
回覆文章